SSM’s Presence in Textile Industry

SSM machinery for a wide range of applications

  • Spinning & Twisting (soft & rewinding, assembly winding, air covering for dual core)
  • Yarn Dyeing (soft and rewinding)
  • Knitting (rewinding)
  • Weaving (warp & weft winding)
  • Sewing Thread (V cone, Y cone and tube winders)
  • Filament Industry (soft & rewinding, assembly winding, ACY, ATY)
  • Technical Textiles (rewinding and assembly winding)

Applications in Textile industry and IOT

Dye Packages / Rewinding

Air Texturing

False Twist Texturing

Air Covering

Draw Winding

Assembly Winding

Sewing Thread

Parallel Winding

Digital Service (Essential-SSM)

fastflex – Electronic Yarn Traverse System

SSM, inventor and patent holder of the first electronic yarn traverse system

Successfully introduced as preciflex in 1995, during the ITMA in Milan, since then, the performance of the electronic traverse system has been improved and the speed performance enhanced (fastflex).

High flexibility to produce made-to-measure crosswound packages .

Change of traverse length, the spool size as well as the crossing ratio without big efforts.

Up to 950 double strokes/minute (10’’- traverse).

Over 200 000 spindles have been equipped with the original electronic yarn traverse system of SSM since the introduction in 1995.

preciforce – Backpressure System

SSM’s worldwide unique backpressure system

Density and diameter differences in the production of yarn packages are things of the past.

Consistency of density and diameter from package to package becomes the standard when preciforce is being used, resulting in perfectly wound yarn packages that set new quality benchmarks.

Productivity of your production line can significantly be increased thanks to preciforce.

preciforce significantly reduces waste and thus increases profitability

Soft- and Rewinding – NEO-YW

Offers clear benefits to dye package winding & rewinding of filament and staple yarns, with or without lubrication

Technology

  • DIGICONE 2 or precision
  • fastflex thread laying system
  • preciforce backpressure system
  • Adjustable supply package tray
  • Small environmental impact
  • For textured or flat filaments, elastic yarns, silk, fine technical yarns and staple yarns from 10 – 3 000 dtex (depending on type of digitens)

Options

  • digitens “f” with overfeeding device or “g” (with additional gate tension) or “d” (with additional disc tension) controlled by online tension sensor
  • Dry waxing or lubrication device
  • Dust protection device
  • Travelling blower with suction system

Soft- and Rewinding – TWX-W

The economical way to flexibility

Technology

  • DIGICONE or precision winding
  • fastflex thread laying system
  • Adjustable mechanical backpressure system
  • Freely programmable packages shapes: cylindrical packages or cones up to 5°57’
  • For staple yarns, textured filament yarns of Ne 3…80 (Nm 5…135 / 80…2 000 dtex)

Options

  • digitens “f” with overfeeding device controlled by online tension sensor
  • Dry waxing device
  • Travelling blower with suction system

Soft- and Rewinding – PWX-CTM and -MTC

To maintain a high residual elasticity of elastic Polyamide and Polyester draw textured yarns after dyeing

Technology

  • DIGICONE or precision winding
  • fastflex electronic yarn laying unit along with the innovative online yarn tension control system (digitens)
  • Freely programmable packages shapes: cylindrical packages or cones up to 3°30’ (PWX-MTC only)
  • For all elastic filament yarns (PA or PES DTY) of 10…1 200 dtex

PWX-MTC

Including individual spindle switch for changing the sense of rotation and customer specific supply package support for…

…hanks…

…muffs…

…regular or coreless dye packages

Assembly Winding – TWX-D

Creates a new dimension for a cost-effective assembly-winding process

Technology

  • DIGICONE or precision winding
  • fastflex thread laying system (invented and proven SSM technology)
  • Adjustable mechanical backpressure system
  • Freely programmable packages shapes: cylindrical packages or cones up to 5°57’
  • For staple yarns, textured filament yarns of Ne 3…80 (Nm 5…135 / 80…2 000 dtex)

Options

  • digitens “d” with overfeeding and disc tension device controlled by online tension sensor
  • Integrated 3-ply creel
  • Balloon separators
  • Travelling blower with suction system

Sewing Thread Finish Winding – TK2-20 CT KT TT

Fulfills the highest yarn processing requirements – wound for perfect seams

Technology

  • With its 13,000 rpm spindle speed and a maximum flexibility in make-up conversion
  • Electronically controlled tuck-in device and the slit-drum with quick-lock
  • Infinitely variable setting of the crossing in a range from 2 to 4 crosses
  • doffer for fast and safe automatic bobbin exchange
  • For sewing thread yarns up to 3 300 dtex

Options

  • lubetex, precision lube applicators with dosing gear pump for highest accuracy and cleanest operation, for hot and cold lubrication
  • Automatic yarn end fixation with snap system for Kingspool

Sewing Thread Finish Winding – TK2-20 KTE

Most flexible sewing thread finish winder for bonded filaments

Technology

  • fastflex thread laying system, synchronization of take-up and traverse speed
  • Electronically controlled tuck-in device: tucked short end tail / no loose tails
  • Infinitely variable setting of the crossing in a range from 2 to 4 crosses
  • doffer for fast and safe automatic bobbin exchange
  • For bonded filaments up to 3 300 dtex

Options

  • lubetex, precision lube applicators with dosing gear pump for highest accuracy and cleanest operation, for hot and cold lubrication

Air Texturing

Brings a natural look to synthetic filament yarns

Textile yarns

50 – 500 dtex
PES, PA, PP

Automotive

500 – 1 500 dtex
mainly PES

Home furnishing

150 – 1 500 dtex
PES, PA, PP
slub yarns

Carpet yarns

500 – 2000 dtex
PES and PP

Industrial yarns

500 – 3 200 dtex
PA, PES, PP
glass fibres

Air Texturing – DP5-T

Finest machine technology for exceptional yarns

Technology

  • DIGICONE or precision winding
  • fastflex thread laying system
  • Individual spindle drive
  • Flexible traverse from 100 – 270 mm
  • Universal speed control for each feeder
  • For fine to coarse counts PES and PP up to 4 000 dtex and PA up to 1 400 dtex

Options

  • Automatic doffing on the fly system for continuous operation and maximizing productivity
  • Positively driven elastomer yarn unrolling device
  • fancyflex to create unique effects in fabrics like volume bands, slubs or neps

DTY – Ứng dụng

Các ứng dụng đối với sản phẩm sợi đã xử lý trên máy SSM

Seamless

11 – 200 dtex
PES, PA, PP

Denim

75 – 330 dtex
Mainly PES

Sports wear

20 – 110 dtex
PA, PES

Elastic ribbons

50 – 330 dtex
PES, PA

Socks / Hosiery

11 – 200 dtex
PES, PA, PP

False Twist Texturing – TG30 A

An economic way to bring bulk and elasticity to flat continuous filaments

Technology

  • Straight yarn path through the entire texturing zone for the production of fine and medium count draw textured filament yarns
  • Automatic doffing on the fly system for continuous operation
  • Designed for the economic production of fine PA and PP yarns
  • Count range 7 up to 330 dtex

Options

  • External trolley creel for 1 end and reserve per position
  • Sequential draw shaft for the drawing of second yarn
  • Intermingling shaft with nip roller for precise tension control in the intermingling / air covering zone

Air Covering – XENO-AC

Flexible production of elastic yarns

Technology

  • DIGICONE 2 or precision
  • fastflex thread laying system
  • Individual and precise yarn tension control of each yarn component during every yarn processing step.
  • For filament yarns, Elastane from 22 – 3 300 dtex

SSM “TWIN” application for core spun production with Lycra/T400 on ring spinning frame

Options

  • preciforce backpressure system
  • Automatic full package changer
  • Air covering / intermingling jet
  • Elastane feeding device
  • Oiling device
  • Integrated 2-ply or 3-ply creel; outboard creel on request
  • fancyflex VARIO and intermingling option

Strong Global Presence for Best Support

3 Plants and product development locations – 9 local service stations and 80 agencies worldwide

Headquarter in Wädenswil, CH

Subsidiary in Galbiate, IT & Zhongshan, CN

Representative offices in Hong Kong & Spartanburg, USA

Contact Details

Where to find us

SSM Area Sales Manager: Mr. Dennis Bidaure

SSM Schärer Schweiter Mettler AG
Room 203, 2/F Park Tower, 15 Austin Road
Tsimshatsui, Kowloon, Hong Kong
Phone +852 2736 2698
Email: [email protected]
Hompage: www.ssm.ch

Local contact: Mr. Tran Ngoc Lanh

TRAN KIM LONG TRADING COMPANY LIMITED
37/72/14 Tran Dinh Xu, Cau Kho Ward, District 1
700000 Ho Chi Minh City, Vietnam
Phone +84 903742951
Email: [email protected]

You may explore more information in the web page of SSM.